F1/C2 Fire Panel CQR CQR Security has for over 30 years been dedicated to designing, developing, producing and supplying quality service products. These all meet with the latest requirements set out by the EN50131 standards to grades 1, 2 and 3. CQR Website F1-C.pdf£75.00DetailsDescriptionThe FI/C range of conventional fire control panels features three models with 2, 4, and 8 zones. Housed in a stylish modern ABS housing, the FI/C range of fire panels are ideal for small to medium size installations.Designed and manufactured to comply with the requirements of EN54 parts 2 and 4 (1998) the FI/C uses active end of line monitoring to permit head removal protection as required by BS5839. Programmable zone coincidence and alarm delay timer (0-10 min) are standard features to help reduce false alarms. The one man test facility enables simple and rapid testing of the system at commissioning and during maintenance operation. Features• Two, four and eight zone non-expandable control panels • Up to 32 conventional smoke and/or heat detectors per zone (not exceeding 2000 sq metres per zone) • Active end of line monitoring • Programmable non-latching zones • Delay timer programmable on/off per zones • Zone coincidence programmable for adjacent zones • Two access levels • One man test • Supervised auxiliary 24 volt output • 2 Supervised/monitored sounder circuits • 2 Programmable inputs for class change, remote silence, remote reset etc. • 2 Relay outputs, fire and fault • Power supply 1.5A at 28Vdc • Fully EN54 part 2 and 4 compliant • Repeater output • Multiplexed output for LED’s and additional relay outputs per zone • Addressable Loop interface card SpecificationUp to 20 conventional smoke and/or heat detectors per zone. Active End of Line monitoring. Programmable non-latching zones. Delay timer programmable on/off per zone. Zone coincidence programmable for adjacent zones. One man test. Supervised auxiliary 24 volt output. 2 supervised/ monitored sounder circuit. 2 programmable inputs for Class change, remote silence, remote reset etc. 2 Relay outputs fire and fault,Power supply 1,5A at 28Vdc. Fully EN54 part 2 and 4 compliant.